| In August, 2026 Allied Has Developed the First Foam Cement with High Acoustic Features per ASTM-E1050 Impedance TubeTest |
|
(matching or exceeding
the sound absorption coefficent
α |
non-flammable, pre-cast or on-site cast, high mechanical strength, lightweight |
|
MISSION STATEMENT |
|
Performance of currently available acoustic building materials are mostly flammable or combustible with hazardous smokes. |
|
Allied produced the first foam cement with controlled degree of open pores,tortuosity, increased broadband sound absorption by wavelength resonances and impedance matching*. |
| (* confirmed with ASTM-E1050 compliant 1" to 4" diameter impedance tube setups with 2-4 microphones and graphic equalizer.) |
![]() |
|
![]() |
| Allied A20A panel performed well in sound absorption vs commercial high density rockwool and cellulosic panels | Allied A1 panel performed well in sound absorption vs 3" thick PU Wedge Foam |
Allied foam cement panel outperformed commercial autoclaved aerated concrete |
|
OTHER HIGHLIGHTS |
|||||||||||||||||||||
|
HIGHLIGHT - JANUARY, 2016 (World Trade Center Phase II Project, New York) Versatile Compact Foam Cement Mixing Pumping Setup - High Mobility with Good Output |
|||||||||||||||||||||
|
|||||||||||||||||||||
| Landscape Architechture on the Roof - An application with allied low slump foam cement | ||||||||
| Harvard University - NorthWest Science Building, 530,000 ft2 multidisciplinary research facility | ||||||||
| The World's 1st Low Slump Geotechnical Roof Fill used Allied's Cement Composite Design, Foam Products & Machinery. | ||||||||
|
The award winning facility places more than half the total square footage of the facility below grade, and incorporates three functioning green roofs. The south facade of the Northwest Science Building defines a new South Yard, equipped with low landscape furniture. The yard is a green roof over extensive basement levels, with skylights bringing daylight into the underground areas. |
||||||||
|
||||||||
| (Pre-project mockup work by Allied Foam Tech is shown below) |
![]() |
![]() |
![]() |
![]() |
| Mixing & Pumping of High | Applying of High Slump Loss | Finished Foamed Cement Crown | Cross-section of |
| Slump Loss Foam Cement | Foam Cement on 1 Vertical/4 Horizontal Slope | On Highly Sloped Geofoam | Landscape after ~ 1 year |
| Our Mission |
| At Allied we are committed to the continuing development of versatile and highly stable aqueous foam and systems with a wide range of properties and applications that meet the specific needs of our customers in the various industrial sectors. |
| Technology |
|
Allied Foam Tech has developed a universal foam technology for a wide range of
industrial and
environmental applications. The excellent stability and dynamic nature
of Allied's make them ideal for use in
reducing the weight of cement/concrete, ceramics, firebricks,
adhesives, coatings, and binders. Foam stability derived from Allied's
many foam systems usually outranks that of any other existing
technologies available in today s marketplace. The
AFT
series of foam agents, using compressed air and Allied foam
generating equipment, generates very fine and stable foams. They are used
for the manufacture of lightweight
(or foamed) concrete, lightweight ceramics, insulative
firebricks, alternative landfill cover, foam coatings, foam adhesives,
long-duration firefighting foams and other uses. Substrates such as
cement, concrete, coating formulations or others that incorporate
Allied's foam products usually exhibit reduced weight with improved
workability, insulation value, sound proofness, and expanded
applications. Allied has also developed various models of compact and versatile foam generating equipment for production or field application that can be manually or remotely controlled. |